Can a shower glass calculator determine panel sizes?

A geometry planner can estimate rectangular panel dimensions from enclosure dimensions and explicit clearances, but the final glass size must follow the selected hardware and installation system.

Does this calculate glass thickness?

No. Glass thickness and safety specification require separate design and product requirements.

Can I split a shower enclosure into several panels?

Yes. This planner distributes the stated enclosure width across a selected number of panels.

Does this create a fabrication-ready glass drawing?

No. It is a planning tool and does not account for every hardware, notch, hinge, seal, slope or edge detail.

Shower enclosure geometry

Shower Glass Panel Layout Planner | Cut Sizes

Turn enclosure dimensions into a basic panel layout with equal panel widths, explicit edge clearances and a simple cut-piece schedule. It is designed for early planning before hardware-specific glass fabrication drawings are produced.

Enclosure layout inputs

Overall enclosure width

Panel depth

Glass height

Number of front panels

Total edge clearance per front panel

Door / hardware deduction per front panel

Dimension unit

This planner assumes rectangular panels and equal front-panel distribution. Real shower systems can require hinges, clamps, notches, holes, slopes, seals, wall conditions and hardware-specific deductions.

Enter enclosure dimensions and panel count.

Basic shower glass schedule

Front panel width

—

Equalized after selected deductions

—Front panel width

—Depth panel width

—Total glass area

—Total panels

Panel	Type	Width	Height	Area

—

How the layout is calculated

The planner divides the stated front width among the chosen number of panels. A user-defined deduction is then applied to each front panel. The depth panel is treated separately so the schedule remains understandable.

Front base width = enclosure width ÷ front panel count
Front panel width = front base width − edge clearance − hardware deduction
Total glass area = sum of each panel width × panel height

Why this is not a fabrication drawing

Shower glass can include tempered safety glass requirements, door swings, hinges, handles, wall returns, notches, cut-outs and exact hardware geometry. Those details can materially change cut size.

Use the result for coordination

The schedule is useful for estimating area, checking rough panel proportions and discussing layout with a fabricator. It should not replace a final shop drawing or product-specific measurement process.

Worked example

A 1.8 m front width divided into two equal panels gives 0.9 m before deductions. With 20 mm total edge clearance and 20 mm hardware deduction:

Panel width = 0.9 − 0.02 − 0.02 = 0.86 m

At 2.0 m glass height, each front panel contributes 1.72 m² to the estimated glazing area.

Frequently Asked Questions

Does this calculate shower glass thickness?

No.

Can I model several front panels?

Yes.

Does it include hardware holes and notches?

No. Those require hardware-specific fabrication dimensions.

Can this be used as the final glass cutting schedule?

No. Final measurements should follow the actual enclosure and hardware system.