How this outlet layout planner works
The planner treats the room as a rectangle and attempts to distribute outlet points within an inner zone after applying the entered edge margin. It calculates the number of spacing segments required along each dimension and places points around a regular grid.
Why this is a planning layout, not a code check
Outlet location requirements can depend on building use, jurisdiction, room function, wall configuration, furniture, accessibility, equipment and other design factors. The planner deliberately does not invent a universal code spacing rule. The spacing value is entirely user-controlled.
Spacing versus point count
If the available wall run is longer than the target spacing, the planner increases the number of intervals so that the resulting spacing does not exceed the entered target within the simplified rectangular model.
Exclusion zones
The edge margin creates a simplified “keep clear” zone around the room perimeter. It is useful for conceptual layout work when outlets should not be positioned directly at a boundary. It is not a substitute for door openings, fixed equipment, windows or other actual obstructions.
Example
For a 6 m × 8 m room, a 3 m target spacing and a 0.5 m margin, the planner creates a regular set of positions inside the available rectangle. The exact count depends on how many intervals are required to keep the modeled spacing within the target.
Common mistakes
Do not treat the automatically generated grid as a construction drawing. A real layout should account for doors, built-in furniture, equipment, wall types, access requirements and the intended use of each point.
Safety and limitations
This tool provides a conceptual position plan. It does not select outlet ratings, circuit arrangements, conductor sizes or installation heights, and it does not certify compliance.
Frequently asked questions
Can the room use metres or feet?
Yes. Use one consistent unit for width, length, spacing and margin.
Does the planner know where doors are?
No. For that reason, door and furniture locations must be reviewed separately before using the plan.
Does this determine the legally required outlet count?
No. The count is produced from your chosen spacing assumptions, not from an assumed jurisdiction-specific rule.