What this tool is for
The bend sequence planner focuses on fabrication order. Instead of simply counting bends, it records the distance before each bend and the direction of that bend. This is useful when preparing a route for physical fabrication.
How the sequence works
Each row represents the straight distance from the previous step to the next bend. The direction field records the intended turning orientation as a project planning reference.
Why sequence matters
Two routes can contain the same number of bends and still require completely different fabrication sequences. Order, spacing and turning direction determine the resulting geometry.
Example
A sequence of 10 units to a 90° right bend, followed by 6 units to a 45° left bend, followed by 8 units to a 90° right bend is materially more informative for fabrication than simply recording “three bends”.
Important fabrication caveat
The planner does not calculate take-up, developed length, bending springback, minimum bend radius or tool-specific marks. Those details depend on the conduit and bending method.
Safety and limitations
Verify actual measurements and tooling requirements before fabrication. The generated sequence is a planning reference rather than a certified installation drawing.
Frequently asked questions
Can I use degrees other than 90°?
Yes. Enter the required bend angle for each step.
Does direction mean clockwise or counterclockwise?
The planner uses simple project labels such as left, right, up and down. Use the project drawing to define the actual coordinate convention.
Does the tool calculate bending marks?
No. It intentionally avoids fabricating tooling-specific deductions.