CYANOTYPE UV LABLast reviewed: 2026-11-19

Cyanotype Sun Print & Exposure Calculator

Quick answer: Mix cyanotype Part A (ferric ammonium citrate) and Part B (potassium ferricyanide) in an exact 1:1 volume ratio, using roughly 2.5mL to 4.5mL total per 100 square inches depending on fabric or watercolor paper absorbency. Dry in total darkness, expose in UV sunlight until shadows turn bronze-slate, then wash in cold water.

1:1 Sensitizer Volume & Solar UV Exposure Simulator Prussian Blue Darkroom Lab
UV Index6 UV
Print Area80 sq in
Shade Factor15% shade
1:1 Part A + B Mix
--
UV Exposure Window
--
Wash & Oxidation Cue
--
Ready

What Materials, Budget, and Time Does This Project Need?

Estimated Cost
$8 - $24 sensitizer starter bottle set
Active + Cure Time
15 min coat + 1-2h dark dry + 5-25m UV sun
Skill Difficulty
Beginner to Intermediate
Peak Craft Window
Year-Round Studio & Sunny Garden Workshops

Core Supplies Checklist

How Do Cyanotype Substrates and Lighting Conditions Compare?

Substrate / Mode1:1 Coating RateUV-6 Sun WindowKey Prep StepWash Behavior
100% Cotton Tote~4.6 mL / 100 sq in9 - 14 minPre-wash out factory sizing5 min cool rinse; neutral soap only
300gsm Watercolor Paper~2.8 mL / 100 sq in6 - 10 minUse unbuffered 100% cotton rag3-4 min tray wash; dry flat
Botanical Pressed Flat~3.0 mL / 100 sq in7 - 12 minClamp glass tight over pressed stemQuick rinse prevents water stains
Cloudy Overcast UV~3.2 mL / 100 sq in18 - 30+ minMonitor olive-bronze color shiftStandard cold wash + peroxide option

What Safety Rules Must You Follow Before Starting?

Follow your product's own label and Safety Data Sheet (SDS) instructions where brands, cure ratios, or temperatures differ.

How Do You Mix the Classic 1:1 Cyanotype Sensitizer?

Invented in 1842 by Sir John Herschel and famously pioneered by botanist Anna Atkins, the classic cyanotype process relies on two light-sensitive iron compounds: ferric ammonium citrate (Part A) and potassium ferricyanide (Part B). Separately, each amber stock bottle remains stable for months in cool dark storage.

Right before coating, measure equal volumes of Part A and Part B—an exact 1:1 ratio—into a small non-metallic cup. Because the combined working liquid begins slowly degrading if left open in stray light, mixing only the exact milliliters needed for your print square inches saves chemicals and guarantees crisp highlight whites.

As a studio benchmark, smooth 300gsm hot-press or cold-press watercolor paper uses roughly 2.8 mL of mixed 1:1 solution per 100 square inches, whereas absorbent 100% cotton canvas totes require closer to 4.5 mL per 100 square inches for rich, even coverage.

1:1 Sensitizer Ratio RuleMix equal parts (1:1 by volume) Part A ferric ammonium citrate and Part B potassium ferricyanide in dim indoor light immediately before brushing.

How Long Should You Expose Cyanotype Prints by UV Index and Shade?

Cyanotype chemistry responds primarily to ultraviolet wavelengths rather than visible brightness, which explains why mid-day summer sun exposes prints far faster than late afternoon winter light or heavy tree shade. Check your local UV Index before stepping outside.

At UV Index 6 in unobstructed sun, 300gsm watercolor paper typically reaches full solarization in 6 to 10 minutes, while heavy cotton fabric needs 9 to 14 minutes. Under overcast skies or 50% porch shade, double or triple that window—watching the exposed border directly rather than relying solely on a kitchen timer.

Visual cue beats guesswork every time: pull your print from the sun when unmasked borders shift past bright turquoise into a moody olive-bronze or slate gray. Overexposing slightly is safer than underexposing, because cold water rinse washes away unexposed salts.

Why Does Cotton Paper Differ From Cotton Tote Fabric?

Paper and textile fibers interact with iron salts differently. Acid-free cotton rag watercolor papers (200 to 300 gsm) hold sensitizer near the surface sizing, yielding razor-sharp botanical contact prints and deep velvet blues after a gentle 3-to-4-minute cold water bath.

Raw canvas tote bags absorb sensitizer deeper into the weave and frequently contain factory starch or alkaline optical brighteners that bleach Prussian blue. Always machine-wash new cotton totes with plain water or pH-neutral textile wash and dry flat before brushing your 1:1 mix.

Also skip standard alkaline laundry detergents when washing finished cyanotype garments later—phosphates and high-pH soda ash fade Prussian blue back toward pale yellow. Wash gently in cool water with mild neutral soap and line-dry out of harsh midday glare.

How Do Cold Water Washing and Peroxide Oxidation Deepen Prussian Blue?

Once UV exposure finishes, carry your print indoors immediately and slide it face-up into a tray of cool running tap water. Unexposed yellow-green ferric salts dissolve rapidly, revealing crisp white botanical silhouettes against deepening blue shadows.

Normally, dissolved oxygen in the rinse water and air gradually oxidizes the ferrous ferrocyanide into full-strength Prussian blue over 12 to 24 hours of drying. If you want to preview the final deep cobalt tone immediately in studio, dip the washed print for 20 seconds into a separate cool tray holding 1 teaspoon of 3% household hydrogen peroxide per liter of water, then rinse once more in plain cold water.

Always dry watercolor prints flat on clean blotter towels or hanging corners, away from paperclips that can leave iron rust marks.

How Do You Fix Common Studio Mistakes Fast?

Entire print washes clean pale white in the cold rinse tray with almost no blue left.

Likely Cause: Either the coated paper was washed out before UV exposure completed, or alkaline/buffered paper bleached the Prussian blue image.

Step-by-Step Fix: Expose longer until exposed areas shift visibly to a dark olive-bronze or slate gray before rinsing, and use unbuffered 100% cotton watercolor paper or pre-washed fabric.

Blurry halos appear around pressed leaves and lace edges.

Likely Cause: Thick plant stems lifted the glass slightly or the print shifted mid-exposure without clamps.

Step-by-Step Fix: Flatten thick botanicals overnight in a press first and clamp the glass pane firmly against foam-backed board with heavy binder clips.

Coating turns dull green-blue indoors before you ever step outside into the sun.

Likely Cause: Sensitized sheets dried under bright fluorescent or window UV light, fogging highlights.

Step-by-Step Fix: Coat and dry sensitized cotton or paper under dim tungsten/LED indoor light or inside a light-tight box with gentle air circulation.

Cotton tote shows blotchy purple stains or streaks after washing.

Likely Cause: Fabric sizing or optical brighteners reacted with iron salts, or soap detergent contained phosphates/soda ash.

Step-by-Step Fix: Pre-wash cotton totes in hot water with mild neutral detergent, rinse thoroughly, and skip fabric softeners before coating.

Frequently Asked Questions

What ratio do you mix cyanotype Part A and Part B chemicals?

Mix ferric ammonium citrate (Part A) and potassium ferricyanide (Part B) in an exact 1:1 ratio by volume right before coating your paper or fabric.

Why did my cyanotype turn green instead of deep blue?

Green or teal tones right after rinsing mean oxidation is still in progress. Let the print dry for 24 hours in air or briefly dip it in cool water spiked with a splash of 3% hydrogen peroxide to lock in deep Prussian blue.

Can I coat cyanotype paper and store it for later?

Yes. Once dry in complete darkness, coated paper stored inside black light-tight bags with silica packets stays usable for several weeks, though freshly coated paper produces the brightest whites.

Does window glass block UV rays during a sun print?

Modern double-pane residential windows and acrylic plexiglass often include UV-blocking coatings that triple exposure times or stall prints. Use plain single-pane picture frame glass outdoors in direct sun.

Are cyanotype textiles washable afterward?

Yes, rinse finished cotton prints in cold water with pH-neutral soap and air dry in shade. Avoid bleach, oxy-cleaners, and high-alkaline detergents, which lighten Prussian blue.

Related Craft & Gemstone Studios

Verified Studio References & Sources

Last reviewed: 2026-11-19

Embed or cite this tool

Copy-paste HTML attribution snippet:
Cite as: GemsMakers. "Cyanotype Sensitizer & UV Sun Exposure Calculator (1:1)." GemsMakers Tools & Calculators, https://gemsmakers.com/cyanotype-sun-print-exposure-calculator.php (accessed 2026-11-19).