Stained Glass Pattern Studio, Copper Foil & Solder Estimator

Drag gold control vertices to eliminate impossible inside glass cuts, paint panes with sunlit cathedral tints, toggle blueprint cut-line mode, and compute exact copper foil tape yards and 60/40 solder weight.

GemsMakers Research Lab
| 📊 Open Datasets | ⚡ Free REST API | 🏷️ SVG Badges
Total Foil Perimeter Length186 in (5.2 yd)
Roll Allowance (+10% overlap)0.16 of 36-yd roll
Estimated 60/40 Solder0.62 lb (~9.9 oz)
Glass + 20% Cutting Scrap173 sq in (1.20 sq ft)
Panel Width (in)12 in
Panel Height (in)12 in
Copper Foil WidthTiffany Standard
Glass Cutting Scrap %20%

Copper Foil Width, Glass Thickness & Solder Reference Table

Foil Width Best Glass Thickness Solder Bead Appearance Recommended Solder Alloy
3/16 inch (4.8 mm)2 mm – 3 mm CathedralDelicate thin copper line60/40 Tin-Lead or Lead-Free
7/32 inch (5.5 mm)3 mm Standard Art GlassClassic balanced raised bead60/40 Tin-Lead (Fast Freeze)
1/4 inch (6.4 mm)4 mm Texture / Rippled GlassWide dramatic architectural seam60/40 or 50/50 Flat Came Look
3/8 inch (9.5 mm)Fused slabs & 3D boxesStructural heavy wrap edge50/50 High-Strength Build
1/4" Round Lead Came3 mm Traditional PanelsMatte H-channel museum lead50/50 Joint Soldering Only
3/8" Zinc Came FrameOuter Panel BorderRigid architectural perimeter50/50 + Oleic Acid Flux

Frequently Asked Questions

How much copper foil tape do I need for a stained glass piece?

Sum the perimeter of every individual glass piece (which is roughly double the shared interior seam length plus the outer frame) and add 10% for overlap tails. A standard 36-yard roll covers 1,296 inches.

What width copper foil should beginners choose?

7/32 inch (5.5 mm) foil is the universal standard for 1/8 inch (3 mm) art glass because it leaves an even lip on both faces for clean beaded solder seams.

How much 60/40 solder does each square foot of stained glass use?

Medium-complexity panels with 20 to 35 pieces per square foot typically consume around 0.7 to 1.2 pounds of 60/40 tin-lead solder (or lead-free equivalent) depending on solder bead height.

Related Craft & Glass Studios